
A yard that turns on at sunset.
Architectural low-voltage LED lighting — path lights, uplights, downlights, step lights, and tree-mounted moonlighting — designed as a layered system, wired clean, and dialed in on a single tap from your phone. Enjoy your yard from sunrise to midnight.
Light is the last 10%.
You can build the perfect patio, plant the perfect garden, and lay the perfect paver — and at sunset all of it disappears unless you've thought about lighting. Done well, lighting is what turns the yard from a daytime project into a nighttime room.
We design every lighting plan as four layers: path lighting at ankle height, accent uplights on trees and architecture, soft downlights from above, and warm in-ground markers for steps and edges. All 12V LED, all bronze die-cast fixtures, all on a smart transformer with astronomic timer and zone control from your phone. The result is restrained, layered, and almost invisible — until the sun goes down.
Six layers of landscape light.
A great lighting plan stacks layers — never one type alone. Path lights without uplights feel like an airport runway; uplights without down-light feel theatrical. We design every yard as a composition of all six.






The numbers behind a clean LED system.
Safe to handle, safe in wet locations, no permit required after the transformer.
Warm-white LEDs only — never daylight or cool. Plants and architecture read warm at night.
50,000-hour lamp life — 17 years of dusk-to-dawn before a bulb needs swapping.
Bronze die-cast fixtures with a 15-year manufacturer warranty against corrosion.
Four moments after sunset.
Lighting works at four very different scales — a guiding path, an architectural accent, a soft canopy wash, and a focal-point fixture. We layer all four in every plan to give the yard depth at night.
Path & step lighting.
Low ankle-height path lights and recessed step lights guide the foot at night without making the yard feel commercial.
Tree & architectural uplights.
In-ground uplights wash a feature tree or stone wall — the move that gives a yard its night-time silhouette.
Moonlighting.
High-mounted downlights in tree canopy cast soft, dappled light on the patio below — the closest thing to actual moonlight.
Patio & string lighting.
Bistro string lights overhead a dining table or seating zone — the warm overhead glow that makes the patio feel like a room.
From night-walk to final dim.
Great lighting is designed at night, not by daylight. We do every consultation after dark with handheld test fixtures so you see the actual effect before we wire a thing — then engineer the system to match.
Night-walk consultation
We meet on-site after dark with handheld 12V test lights. We position fixtures live, see the actual shadows and beam-spreads, and finalize layer placement before any wire is run.

Wire route & transformer plan
We map low-voltage wire runs from a single home-mounted transformer with capacity for the full system plus 30% headroom. Routes follow planting beds — no trenching across lawn.

Trenching & cable
Direct-burial 12-gauge low-voltage cable is trenched 6" deep along bed lines. All connections are made with watertight gel-filled connectors — no wire-nuts in soil.

Fixture setting & aiming
Bronze die-cast fixtures are set in beds, in-ground for uplights, and mounted high in canopy for downlights. We aim every fixture at night to dial in shadow and reveal.

Smart transformer & controls
A smart 12V transformer is mounted at the home. Wi-Fi enabled with astronomic timer (auto sunset/sunrise), zone control, and dimming through a phone app or wall keypad.

Final tune & handoff
A final after-dark walkthrough — every fixture is fine-aimed, dimmer levels are dialed, scenes are saved (Dinner, Late Night, Holiday). Then we hand you the app login and the warranty.

Start with a night-walk consult.
Enjoy your yard all day and night.
Free estimate in 24 hours. Most lighting systems design, trench, and tune in 3–7 days, with a 15-year fixture warranty.